Go to content Go to main menu

Woltman well water meter WB-N

Well water meters are meters from type Woltman perpendicular with a special design of the housing.

These can be installed as wellheads in place of a 90° elbow in accordance with DIN 28537 and DIN 28637. The housing is specially adjusted to the conditions in well systems. The well water enters the bottom of the water meter, flows through the vertical turbine and is directed out of the meter again at right angles.

The special construction of our turbines guarantees low starting flows and also provides sufficient reserves in the overload range even to be able to record high flow rates reliably. The internal and external coating protects the meter permanently against corrosion. Mineral deposits in the water are unable to damage the dry dial register. The design is ideally suitable for narrow well shafts with small dimensions. There is no need to provide an extra installation location for a Woltman meter.


  • For the measuring of high flow rates
  • For installation at the junction of a vertical pipeline with a horizontal pipeline
  • For cold water up to 30°C (accurate up to 50°C).
Show more

Product images

WB-N woltman well water meter
WB-N woltman well water meterWB-N woltman well water meter


Woltman well water meter WB-N


  • Low starting flow and high overload security
  • Wide mesuring range, low pressure loss
  • Hydraulic bearing relief
  • Durable measuring stability
  • No straight inlet or outlet needed (U0/D0 according to OIML R49 and DIN EN ISO 4064)
  • Materials and coating approved in accordance with KTW / W 270
  • Register rotatable by 355°
  • Operating pressure MAP 16
  • Approved in accordance with MID

Product options

AMR Technologies
  • Opto Sensor
  • Reed Pulser
Housing Material
  • Cast Iron (GGG)
Measuring Principle
  • Woltman vertical
Metrological Class vertical (max.)
  • R 63
Nominal Diameter DN (mm)
  • DN 50
  • DN 80
  • DN 100
  • DN 150
Nominal Flow Q3 (≈ Qn)
  • Q3=25 (≈ Qn 15)
  • Q3=63 (≈ Qn 40)
  • Q3=100 (≈ Qn 60)
  • Q3=250 (≈ Qn 150)
  • Dry Dial
Specified Units on Display
  • Cubic Meters (m³)
  • Cold Water up to 30° C


You can download a PDF Viewer from acrobat.adobe.com to view PDF files.

Other ZENNER products

Discover other interesting products in our product range.

Product imageDirt filter for bulk water metersDirt filter for bulk water meters
Dirt filter for bulk water meters
Even under difficult conditions and where the water quality is poor, the dirt filters for our Woltman bulk water meters make reliable measurement results possible.
No image available.
Sensors for Woltman bulk water meters
Sensors for Woltman bulk water meters
All ZENNER Woltman type water meters can be retrofitted with reed contact, optical encoder or NAMUR induction encoder type active or passive pulsers.
No image available.
Honeycomb flow straightener
Honeycomb flow straightener
The honeycomb rectifier for bulk water meters ensures that the water enters the turbine of the water meter in an unimpeded flow pattern.
Product imagePDC-Communication Module (Pulse Reader)PDC-Communication Module (Pulse Reader)
PDC-Communication Module (Pulse Reader)
The PulseDataCapture module is optimal for the integration of measuring instruments with pulse output in wireless M-bus radio systems or in LPWA-networks (LoRaWAN™, SIGFOX).
Product imageBulk water meter WPD / WPHDBulk water meter WPD / WPHD
Bulk water meter WPD / WPHD
WPD / WPHD is a smart Woltman bulk water meter for the measuring of high flow rates with parallel turbine shaft. It is prepared for remote reading via wired M-bus, wireless M-bus-radio, GSM, LPWAN ...