Go to content Go to main menu

Multi-Jet Bottom Load Water Meters

Sizes: 5/8" (DN 15mm) | 3/4” (DN 20mm) | 1” (DN 25mm) | 1 1/2” (DN 40mm) | 2” (DN 50mm)

OPERATION:
Water flows through the meter’s strainer and into the measuring chamber where it drives the impeller. A drive magnet transmits the motion of the impeller to a driven magnet located within the hermetically sealed register. Powerful rare earth magnets eliminate slipping and uncoupling to increase overall accuracy. The magnet is connected to a gear train which translates the impeller’s rotation into volume totalization displayed on the register dial face.

CONSTRUCTION:
ZENNER PERFORMANCE Multi-jet Water Meters consist of three basic components: main case, measuring chamber and sealed register. The main cases are constructed using either C89833 or C89850 Brass Alloys. Measuring Chambers are constructed of a durable synthetic polymer. Registers are available as either direct read or electronic output.

MAINTENANCE:
ZENNER PERFORMANCE Multi-jet Water Meters are engineered and manufactured to provide long-term service and operate virtually maintenance free. The precise simple design allows for interchangeable parts, reducing parts inventory.

REGISTRATION:
ZENNER PERFORMANCE Multi-jet Water Meters utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt, moisture infiltration, and prevents fogging. The register includes a large odometer-type totalization display, center sweep hand (360°) test circle, low flow leak detector. All Performance Meters have electronic output capabilities for easy conversion to Automated Meter Reading. 5/8” through 1” capacities are: 10,000,000 Gallons, 1,000,000 Cubic Feet, 100,000 Cubic Meters, 6 odometer wheels. 1 1/2” and 2” registration capacities are: 100,000,000 Gallons, 10,000,000 Cubic Feet, 1,000,000 Cubic Meters, 6 odometer wheels.

COMPLIANCE:
ZENNER PERFORMANCE Multi-jet Water Meters are tested and comply with AWWA C708, ISO 4064, and G13IT19001-ISO9000 performance standards.

TAMPERPROOF FEATURES:
Customer removal of the register to obtain free water is prevented through the use of a locking device that requires a special tool, only available to water utilities.

CONNECTIONS:
These meters have been designed with ease of installation in mind through the use of wrench pads. Tailpiece/Unions for installations of meters are available as an option for various pipe types, sizes, and misaligned pipes.

Show more

Product images

Bottom Load Multi-jet Water Meter
Bottom Load Multi-jet Water MeterBottom Load Multi-jet Water MeterBottom Load Multi-jet Water MeterBottom Load Multi-jet Water MeterBottom Load Multi-jet Water Meter

Information

Multi-Jet Bottom Load Water Meters
Downloads

Features

Multi-jet Bottom Load Water Meters utilize a magnetically driven multi-jet design. They are designed to measure cold potable water where flow is in one direction only in residential, commercial, and industrial settings.

Product options

Housing Material
  • Brass
Length (Inches)
  • 10 3/4"
  • 12 5/8"
  • 13"
  • 15 1/4"
  • 17"
  • 7 1/2"
  • 9"
Maximum Temperature (°F)
  • Water up to 122° F
Maximum Working Pressure
  • P.S.I. 150
Measuring Principle
  • Multi-Jet Meters
Nominal Diameter (inch)
  • 3/4 "
  • 5/8"
  • 1"
  • 1 1/2"
  • 2"
Nominal Diameter DN (mm)
  • DN 15
  • DN 20
  • DN 25
  • DN 40
  • DN 50
Specified Units on Display
  • Cubic Foot (cft)
  • U.S. Gallons (g)

Downloads

You can download a PDF Viewer from acrobat.adobe.com to view PDF files.