High Pressure Water Meters
Sizes: 3/4” (DN 20mm) | 1” (DN 25mm) | 1-1/2” (DN 40mm) | 2” (DN 50mm)
Water flows through the meter’s strainer and into the measuring chamber where it drives the impeller. A drive magnet transmits the motion of the impeller to a driven magnet located within the hermetically sealed register. Powerful rare earth magnets eliminate slipping and uncoupling to increase overall accuracy. The magnet is connected to a gear train which translates the impeller’s rotation into volume totalization which is displayed on the register dial face.
ZENNER PERFORMANCE High Pressure Water Meters consist of four basic components: main case, measuring chamber, high pressure stainless steel bottom plate and sealed register. The heavy duty main cases are constructed using C89833 Brass Alloy. Measuring Chambers are constructed of a durable synthetic polymer. Registers are available as either direct read or electronic output. The high pressure bottom plate utilizes a six (6) bolt configuration to withstand working pressures of 300 psi and 600 psi intermittent.
ZENNER PERFORMANCE High Pressure Water Meters are engineered and manufactured to provide longterm service and operate virtually maintenance free. The precise simple design allows for interchangeable parts, reducing parts inventory.
ZENNER PERFORMANCE High Pressure Water Meters utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt and moisture infiltration as well as prevents fogging. The register includes a large odometer-type totalization display, center sweep hand (360°) test circle, and low flow leak detection. All Performance meters have electronic output capabilities for easy conversion to Automated Meter Reading. 3/4” and 1” capacities are: 10,000,000 Gallons, 1,000,000 Cubic Feet, 100,000 Cubic Meters, 6 odometer wheels. 1 1/2” and 2” registration capacities are: 100,000,000 Gallons, 10,000,000 Cubic Feet, 1,000,000 Cubic Meters, 6 odometer wheels.
ZENNER PERFORMANCE High Pressure Water Meters are tested and comply with AWWA C708, ISO 4064, and G13IT19001-ISO9000 performance standards.
Customer removal of the register to obtain free water is prevented through the use of a locking device that requires a special tool, only available to water utilities.
These meters have been designed with ease of installation in mind through the use of wrench pads. Tailpiece/Unions for installations of meters are available as an option for various pipe types, sizes, and misaligned pipes.
High Pressure Water Meters
High Pressure Meters utilize a magnetically driven multi-jet design. They are designed to measure cold potable water where flow is in one direction only in residential, commercial, and industrial settings.
|Maximum Temperature (°F)|
|Maximum Working Pressure|
|Nominal Diameter (inch)|
|Nominal Diameter DN (mm)|
|Specified Units on Display|
You can download a PDF Viewer from acrobat.adobe.com to view PDF files.