Go to content Go to main menu

Multi-jet Hot Water Meters

It is designed to measure hot potable water where flow is in one direction only in residential, commercial, and industrial settings.

It’s top load design is intended to provide for ease of maintenance without removing the main body from the service line.

OPERATION:
Water flows through the meter’s strainer and into the measuring chamber where it drives the impeller. A drive magnet transmits the motion of the impeller to a driven magnet located within the hermetically sealed register. Powerful two pole magnets eliminate slipping and uncoupling to increase overall accuracy. The magnet is connected to a gear train which translates the impeller’s rotation into volume totalization which is displayed on the register dial face.

CONSTRUCTION:
ZENNER PERFORMANCE Multi-jet Hot Water Meters consist of two basic components: main case and the measuring chamber with a sealed register. The main case is made utilizing brass construction. Measuring Chambers are constructed of a durable synthetic polymer. Registers are available as either direct read or electronic output.

MAINTENANCE:
ZENNER PERFORMANCE Multi-jet Hot Water Meters are manufactured and engineered to provide longterm service and operate virtually maintenance free. The precise simple design allows for parts interchangeability which reduces parts inventory.

REGISTRATION:
ZENNER PERFORMANCE Multi-jet Hot Water Meters utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt, moisture infiltration, and prevents fogging. The register includes a large odometer-type totalization display, center sweep hand (360°) test circle, and a low flow leak detector. All Performance Meters have electronic output capabilities for easy conversion to more efficient meter reading technologies. 5/8” through 1” capacities are: 10,000,000 Gallons, 1,000,000 Cubic Feet, 100,000 Cubic Meters, 6 odometer wheels. 1 1/2” and 2” registration capacities are: 100,000,000 Gallons, 10,000,000 Cubic Feet, 1,000,000 Cubic Meters, 6 odometer wheels.

Sizes: 5/8″ (DN 15mm) |[nbsp]3/4” (DN 20mm) | 1” (DN 25mm) | 1 1/2” (DN 40mm) | 2” (DN 50mm)

COMPLIANCE:
ZENNER PERFORMANCE Multi-jet Hot Water Meters are tested and comply with AWWA C708, ISO 4064, and GB/T19001-ISO9000 performance standards.

TAMPERPROOF FEATURES:
Customer removal of the register to obtain free water is prevented through the use of a tamper seal.

CONNECIONS:
These meters have been designed with ease of installation in mind through the use of wrench pads. Tailpiece/Unions for installations of meters are available as an option for various pipe types, sizes, and misaligned pipes.

Show more

Product images

Multi-jet Hot Water Meters
Multi-jet Hot Water MetersMulti-jet Hot Water Meters

Information

Multi-jet Hot Water Meters
Downloads

Features

Multi-jet Hot Water Meters from ZENNER PERFORMENCA utilize a magnetically driven multi-jet design. It is designed to measure hot potable water where flow is in one direction only in residential, commercial, and industrial settings.

Product options

Housing Material
  • Brass
Length (Inches)
  • 10 3/4"
  • 11 5/8"
  • 7 1/2"
  • 9 5/8"
Maximum Temperature (°F)
  • Water up to 194° F
Maximum Working Pressure
  • P.S.I. 150
Nominal Diameter (inch)
  • 3/4 "
  • 5/8"
  • 1"
  • 1 1/2"
  • 2"
Nominal Diameter DN (mm)
  • DN 15
  • DN 20
  • DN 25
  • DN 40
  • DN 50

Downloads

You can download a PDF Viewer from acrobat.adobe.com to view PDF files.

Other ZENNER products

Discover other interesting products in our product range.

Product imageHigh Pressure Water MetersHigh Pressure Water Meters
High Pressure Water Meters
High Pressure Meters utilize a magnetically driven multi-jet design. They are designed to measure cold potable water where flow is in one direction only in residential, commercial, and industrial settings.