Go to content Go to main menu

Hot Water Turbine Meters

They are for use in measurement of hot and cold water in commercial and industrial services where flows are in one direction.

Sizes: 2” through 8”

OPERATION:
Water flows through the turbine section which causes the rotor to turn proportionately to the quantity of water flowing through the meter. A drive magnet transmits the motion of the rotor to a driven magnet located within the hermetically sealed register. The magnet is connected to a gear train which translates the rotations into volume totalization displayed on the register dial face. The only moving parts in the meter are the rotor assembly and vertical shaft

CONSTRUCTION:
ZENNER PERFORMANCE Hot Water Turbine Meters consist of three basic components: Cast Iron Epoxy Coated main case, measuring element, and sealed register. The measuring element assembly includes the rotor assembly, vertical shaft and a calibration vane which eliminates the need for calibration change gears.

MAINTENANCE:
ZENNER PERFORMANCE Hot Water Turbine Meters are engineered and manufactured to provide longterm service and operate virtually maintenance free. If maintenance is necessary, the universal measuring element (UME) can be removed from the main case. Interchangeability of certain parts between like sized meters minimizes spare parts inventory.

COMPLIANCE:
ZENNER PERFORMANCE Hot Water Turbine Meters are tested and comply with AWWA C701 Class II performance standards.

STRAINERS:
ZENNER PERFORMANCE Meter recommends the use of a separate strainer upstream from the turbine meter. Strainers reduce the chance of damage to the rotor as well as the frequency in which it must be removed for inspection. The lack of a strainer may void the warranty of the turbine meter.

CONNECTIONS:
Companion flanges for installation of meters on various pipe types and sizes are available in Bronze or cast iron.

Show more

Product images

Hot Water Turbine Meters
Hot Water Turbine MetersHot Water Turbine Meters

Information

Hot Water Turbine Meters
Downloads

Features

Hot Water Turbine Meters are designed for applications where flows are consistently moderate to high and occasionally low. They are for use in measurement of hot and cold water in commercial and industrial services where flows are in one direction.

Product options

Housing Material
  • Cast Iron (GGG)
Maximum Temperature (°F)
  • Water up to 194° F
Maximum Working Pressure
  • P.S.I. 160
Nominal Diameter (inch)
  • 2"
  • 3"
  • 4"
  • 6"
  • 8"

Downloads

You can download a PDF Viewer from acrobat.adobe.com to view PDF files.

Other ZENNER products

Discover other interesting products in our product range.

Product imageCast Iron Turbine Water MetersCast Iron Turbine Water Meters
Cast Iron Turbine Water Meters
Cast Iron Turbine Meters are designed for applications where flows are usually moderate to high and occasionally low. They are used in measurement of potable cold water in commercial and industrial services ...
Product imageBronze Turbine Water MetersBronze Turbine Water Meters
Bronze Turbine Water Meters
Bronze Turbine Meters are designed for applications where flows are usually moderate to high and occasionally low. They are to be used in measurement of potable cold water in commercial and industrial services ...
Product imageMulti-jet Hot Water MetersMulti-jet Hot Water Meters
Multi-jet Hot Water Meters
Multi-jet Hot Water Meters from ZENNER PERFORMENCA utilize a magnetically driven multi-jet design. It is designed to measure hot potable water where flow is in one direction only in residential, commercial, ...