Go to content Go to main menu

Flow sensor CMF

CMF is a multi-jet flow sensor with high-resolution, interference-free and reactionless electronic scanning.

The flow sensor CMF fullfills all the requirements of the European MID. The flow sensor is available in sizes qp 0,6m³/h, 1,5m³/h or 2,5m³/h.

For trouble-free operation for at least 5 years (+1 years reserve), a built-in lithium battery is built-in.
Theflow sensor CMF is maintenance-free for its entire service life. The flow sensor is designed to be connected to a separately EC-labeled heat meter calculator, optionally for installation in the flow or return of a heat exchanger circulation system.

Product images

Multijet flow sensor CMF
Multijet flow sensor CMF


Flow sensor CMF


  • Can be installed in flow or return
  • Vertical or horizontal mounting permitted
  • Temperature range 10°C – 90°C
  • Insensitive to magnetite thanks to electronic scanning
  • High precision also at low flow rates
  • Available in qp 0.6 / 1.5 / 2.5 m³/h

Product options

Housing Material
  • Brass
Specified Units on Display
  • Cubik Meters (m³)
  • Dry Dial
  • Heating circuit up to 90° C
Operating pressure (max.)
  • MAP 16
Measuring Principle
  • Multi-Jet Meters
Nominal Flow qp (Heat Meters)
  • qp = 0,6
  • qp = 1,5
  • qp = 2,5
Connection interface
  • Type IST (G2")
  • Type M60 (M60 x 1,5)
  • Type PCC (M60 x 2)
  • Type TE1 (M62 x 2)


You can download a PDF Viewer from acrobat.adobe.com to view PDF files.

Other ZENNER products

Discover other interesting products in our product range.

Product imageFlow sensor IMFFlow sensor IMF
Flow sensor IMF
The IMF is a flow sensor for fl ows of 3.5m3/hr to 10m3/hr with a horizontal mounting. Its particular construction ensures high measuring accuracy and reliable measurement stability.
Product imageFlow sensor IMF-ST and IMF-FFlow sensor IMF-ST and IMF-F
Flow sensor IMF-ST and IMF-F
The IMF-ST and IMF-F are flow sensors for flow rates of 3,5m³/hr. to 10m³/hr. The connection and structural dimensions of the meter are in line with DIN 19648 part 3.