Go to content Go to main menu

Hot water meter MTWD-FA-M and MTWD-FA-N

Multi-jet dry dial meter for hot water with flood-proof (IP68) hermetically sealed glass/copper register in a downpipe design

The current state of development of the MTWD-M-CC-FAguarantees the most precise measurement results, minimal bearing load and a long service life.

The MTWD-M-CC-FA is ideally suited to measuring tasks at temperatures up to 90 °C and fits perfectly into all installation locations provided for downpipe meters. By using special materials, outstanding measurement readings can be combined with a high maximum temperature.

The register of the FA variants also works in horizontal position.
The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning and is the basis for remote reading of meter data via radio with LoRaWAN® or wM-Bus (according to DIN EN 13757-4). A combined M-Bus/pulse module is also possible.

Show more
Find out moreBack to products

Product images

Water meter MTWD-FA in a downpipe design
Water meter MTWD-FA in a downpipe design

Information

Hot water meter MTWD-FA-M and MTWD-FA-N
Downloads

Features

  • Multi-jet dry dial meter with shielded magnetic coupling
  • Water meter for downpipe installation
  • Equipped with glass/copper register (IP68) as standard
  • Brass body according to Federal Environment Office (UBA) list
  • Register rotatable 355°
  • Operating pressure MAP 16
  • Approved in accordance with MID

Application

  • For the consumption measurement of hot and clean drinking water or service water up to 90 °C

AMR Technologies

  • As standard with communication interface for EDC modules (Electronic Data Capture):
    • EDC LPWAN radio module (868 MHz) for LoRaWAN®
    • EDC wireless M-Bus radio module according to DIN EN 13757-4
    • EDC- combined M-Bus and pulse module

Product options

Measuring Principle
  • Multi-Jet Meters
Register
  • Dry Dial
Housing Material
  • Brass
Nominal Flow Q3 (≈ Qn)
  • Q3=4 (≈ Qn 2,5)
Nominal Diameter DN (mm)
  • DN 20
Nominal Diameter (inch)
  • 3/4"
Length without connectors
  • 105 mm
Metrological Class horizontal (max.)
  • R 160
Metrological Class vertical (max.)
  • R 40
Temperature
  • Cold Water up to 30 °C
  • Cold water up to 50 °C
Operating pressure (max.)
  • MAP 16
Communication Technologies
  • Combined M-Bus and pulse module
  • Radio via LoRaWAN®
  • Radio via wireless M-Bus
  • Electronic Pulser
  • Reed Pulser
  • M-Bus
Additional Options
  • Copper Can (IP 68)
  • Modulator Disc for inductive sensors
Specified Units on Display
  • Cubic Meters (m³)

Downloads

You can download a PDF Viewer from acrobat.adobe.com to view PDF files.

Other ZENNER products

Discover other interesting products in our product range.

Product imageHot water meter MTWD-M-CC and MTWD-NHot water meter MTWD-M-CC and MTWD-N
Hot water meter MTWD-M-CC and MTWD-N
MTWD-N is a multi-jet dry dial meter for hot water with flood-proof (IP68) hermetically sealed glass/copper register
Information
Product imageHot water meter MTWD-M-ST and MTWD-N-STHot water meter MTWD-M-ST and MTWD-N-ST
Hot water meter MTWD-M-ST and MTWD-N-ST
MTWD-ST is available in two versions: MTWD-N-ST with 7-digit rollers and magnet pointer for pulse output. MTWD-M-ST with 8-digit rollers register and modulator disc for ...
Information