Bathtub meter type MC
The bathtub meter type MC is the ideal solution if there is no shut-off valve for each flat.
The Minomess bathtub meter can be easily installed between the S-connection on the bathtub/shower and the mixer tap. If the meter is connected at one end, the fitting is equalised with a special intermediate piece. The MC measuring capsule set, which has been tried and tested a million times over, can be replaced in just a few simple steps once the calibration period has expired.
The bathtub meter type MC can be equipped ex works with a LoRaWAN® or wireless M-Bus radio module and integrated into the corresponding readout systems. All materials, which are used in the drinking water section, comply with the required standards, guidelines and the current German drinking water approval (other country-specific drinking water approvals on request).
Product images
Information
Bathtub meter type MC
Downloads
Performance characteristics in overview
- Single jet dry-dial meter with protected magnetic coupling
- With 7-digit register and modulator disc for non-reactive scanning for radio
- For vertical installation only
- Register cap made of high-quality UV-resistant polymer plastic
- Battery life 10 years after radio activation
- Brass body (outside chrome-plated)
- Register rotatable 360 °
- Operating pressure MAP 10
- Approved according to MID
Applications
- For the consumption measurement of cold and clean drinking water up to 50 °C
- For the consumption measurement of hot and clean drinking water up to 90 °C
AMR options
- Equipped with a radio module as standard:
- LPWAN radio module (868 MHz) for LoRaWAN®
- wireless M-Bus radio module
Smart Metering functions
- Self monitoring
- Tampering detection
- Reverse water flow detection
- Leakage detection
- Meter stop detection
- Meter oversized detection
- Meter undersized respectively pipe burst detection
Product options
| Measuring Principle |
|
| Register |
|
| Housing Material |
|
| Nominal Flow Q3 (≈ Qn) |
|
| Nominal Diameter DN (mm) |
|
| Nominal Diameter (inch) |
|
| Metrological Class horizontal (max.) |
|
| Metrological Class vertical (max.) |
|
| Communication Technologies |
|
| Temperature |
|
| Operating pressure (max.) |
|
| Specified Units on Display |
|
Other ZENNER products
Discover other interesting products in our product range.
Water Meters ETKD/ETWDWater Meters ETKD/ETWD
Water Meter EKTD/ETWD is a Single-Jet Meter for cold and hot water. The ETKD is equipped with a counter with a shielded magnetic coupling which delivers virtually perfect results ...
Water Meters ETKD-L with polymer plastic housing