Bulk water meter WPD/WPHD T90
The bulk water meter WPD/WPHD T90 is suitable for a medium temperature of up to max. 90 °C.
It can be used to record high flow rates in drinking water distribution and in industry, with low pressure loss and a mostly constant flow profile.
The meter is equipped with a 6-roller dry dial register (IP68) and a modulator disc. This enables electronic, reaction-free scanning and is the basis for remote reading of the meter data via radio with LoRaWAN® or wM-Bus. A combined M-Bus / pulse module is also possible.
A mechanical pulser can also be connected in parallel. Factory tested according to MID specifications. All materials, which are used in the drinking water section, comply with the required standards, guidelines and the current German drinking water approval (other country-specific drinking water approvals on request).
Product images
Information
Bulk water meter WPD/WPHD T90
Downloads
Performance characteristics in overview
- Woltman parallel type
- Nominal sizes DN50 to DN250
- Highest precision and reliability even in case of low flow rates
- Flood-proof (IP68) hermetically sealed glass/copper register
- Low starting flow and high overload security
- Wide mesuring range, low pressure loss
- Hydraulic bearing relieve
- Long-term measuring stability
- Swirl-reducing inlet
- No straight inlet or outlet needed (U0/D0) according to OIML R49 and DIN EN ISO 4064
- Factory tested according to MID specifications.
Applications
- For the consumption measurement of hot and unpolluted drinking water or service water up to 90 °C
- For measuring high flow rates
- Suitable for water glycol heat carriers (without conformity assessment)
AMR options
- Can be combined with stationary GSM system
- Can be retrofitted with a mechanical pulser
- Retrofittable with EDC module (Electronic Data Capture):
- EDC-LPWAN radio module (868 MHz) for LoRaWAN®
- EDC wireless M-Bus radio module (868 MHz)
- EDC combined M-Bus and pulse module
Product options
| Measuring Principle |
|
| Register |
|
| Nominal Flow Q3 (≈ Qn) |
|
| Nominal Diameter DN (mm) |
|
| Length without connectors |
|
| Metrological Class horizontal (max.) |
|
| Temperature |
|
| Operating pressure (max.) |
|
| Communication Technologies |
|
| Specified Units on Display |
|
Other ZENNER products
Discover other interesting products in our product range.
Adjustable compensating pieces for bulk water metersAdjustable compensating pieces for bulk water meters
The movable spacer accommodates the various installation face-to-face lengths of the different meter types and can be fitted very easily.
Dirt filter for bulk water metersDirt filter for bulk water meters
Even under difficult conditions and where the water quality is poor, the dirt filters for our Woltman bulk water meters make reliable measurement results possible.
Sensors for Woltman bulk water meters