Release Notes - Archive

Updates

• Minor improvements and stability enhancements

• Fixed:
  • [EDC]: Issue with serial number meter is fixed

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Fixed:
  • Local license lost when upgrading app – Issue resolved; licenses now persist through app upgrades.
  • Integration of ZENNER.Framework v1.4.0 – Updated to the latest framework for improved stability and performance.
  • Crash when adding manual readout – Fixed an error that caused the app to crash during manual meter entry.
  • Crash on tablets – Stability improvements for tablet devices.

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • [EDCv3 Pulse]: Introduced new configuration parameters:
    • M-Bus baud rate
    • M-Bus address
    • Pulse output mode
    • Pulse width
  • [IUW/S] Support for NearPast Logger v1:
    • Format: DateTime | volume (double) | temperature (float) | state (ushort) | volumePositive (double) | volumeNegative (double)
  • EDC LoRa 868 v3
    • Sensus iPerl wMbus Readout
• Fixed:
  • IUW/S (NFC): Implemented retry mechanism
  • [Caltos_E]: Meters using AES encryption now require a printer serial number for electronic delivery.
  • [IUW/S]: Restored missing DevEUI parameter (introduced bug in version 1.2.70.0).
  • [PDCv1]: ENABLE_RADIO now correctly considered.
  • [EDCv1]: Updated description of pulse multiplier.
  • [EDCv2]:Mechanical Register Type C: Pulse Multiplier = 1, VIF: 0x15 100L, Register digits = 8
  • [Caltos_E]: Parameter ADR is now editable.

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • NDC / IUWS: Added key date logger support for firmware versions below v1.7.1.
  • IUW/S: Added button ‘Clear warnings’ for checksum failure
  • IUW/S: Added progress display for logger readout
• Fixed:
  • French language: Renamed ‘READ OUT MANAGER’ to ‘GESTIONNAIRE DE LECTURE’
  • Improved user-friendly translations for IUW System State
  • Energy values now displayed in MWh instead of Wh

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • IUW/S: ‘Device Mode’ parameter
  • EDC M-Bus configuration
  • ‘Reading time’ parameter for all meter readings.
  • EDC NB IoT: Added DevEUI parameter for EDC NB
  • EDC NB IoT: APN command has been redefined
  • CaltosE: ‘Clear Warning’ parameter
• Fixed:
  • Minoconnect: Various fixes
  • IUW/S: Module configuration
  • PDC LoRa: Parameters ‘Medium’ and ‘Multiplier’ are now editable
  • Corrected the wait time after the IR wake-up sequence on the Nokia C32.
  • Fixed issue with reading NFC on Samsung A54
  • Various bug fixes

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Fixed:
  • EDC: Serial number of the meter and medium can be changed now.
  • Bug fixes

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • “Report a problem” button in “About” section

• Fixed:
  • IUW/S: Logger improvements
  • IUW/S US: All Loggers display measured values in ft³ or gal
  • EDC: The MechanicalRegister parameter can now be edited
  • LoRa: The type of the LoRa DevAddr parameter has been changed from LittleEndian to BigEndian
  • MinoConnect improvements
  • EDC 10L and 100L a/ pulse, Nominal flow is now calculated depending on Pulse multiplier parameter
  • EDC NB IoT:  Missed ‘Meter value’ parameter

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • New language: Chinese (Beta)
  • New language: Russian (Beta)
  • Release notes link on the “About” page

• Fixed:
  • EDC NB: IP address can now be changed
  • EDC/Micro serial number adjustment
  • EDCv1 & PDCv1: The wMBus transmission interval parameter is now user-friendly
  • The units of the parameters are displayed in the selected language
  • Micro: Suggestions changed for the communication scenarios.
  • Bug Fix Wireless M-Bus transmission

Notes

• This release addresses various issues and introduces new features to enhance the functionality and usability of the application
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • Support for the new NFC chip used in IUW/S
  • Smoke detector_LoRa 2.3.6
  • Smoke detector_wM-Bus 2.20.1
  • Heat cost allocator v2.0.5, 2.0.6 and v2.0.7
  • Implementation of parallel radio transmission for IUW/S
• Fixed:
  • Wireless M-Bus smoke detectors cannot be reconfigured as LoRa devices
  • IUW logger without entries are now visible among available loggers
  • Adding suggestions for communication scenarios for all devices

Notes

• This update introduces various new features and fixes issues to improve performance and reliability
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • ZENNER DEFAULT KEY for wM-Bus is integrated
  • NDC: “Reconnect with IUW” button added
  • IUWS: Firmware v1.7.9
  • caltos E: Scenario 337
  • New language: Spanish
  • EDCv2: New parameters “Pulse value” and “Mechanical counter”
• Fixed:
  • Transponder settings in the configurator are always visible
  • Description of the parameter “Pulse multiplier” of the EDC is adjusted
  • User-friendly message added when the value is too large or too small
  • Improved detection of the K01 Blue transponder
  • wM-Bus Fix IUWS v1.7.9
  • Visibility of SetOperationMode in IUW/S is displayed again
  • French translations corrected

Notes

• This release introduces a variety of new features and fixes issues to improve the performance and reliability of the software
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Fixed:
  • Stability of MinoConnect reception

Notes

• This update aims to solve potential issues with signal transmission and ensure smooth communication
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • Crash report to the app
  • T&H: Firmware version 1.0.6
  • C5 LoRa: SetOperationMode function
  • PDC wM-Bus is supported
  • EDC V1: radio “transmission interval” and “radio mode” are supported
  • Check if MinoConnect firmware supports a specific radio protocol
  • New “Register for app” button
• Fixed:
  • Bug fixes MBWBLUE
  • Bluetooth LE improvements
  • NFC – Interface communication stabilized
  • CSV format functionality optimized
  • Bug fixes Wireless M-Bus transmission
  • Bug fixes Transponder
  • PDCv1: Multiple bug fixes
  • PDC/EDC: Use of VIFs unified

Notes

• Additions include a crash report for the app, a new update for T&H to version 1.0.6, Bluetooth LE improvements, and new features for various devices such as C5 LoRa and MinoConnect
• Users are recommended to update the app to benefit from the latest features and improvements

Updates

• Added:
  • EDCv2 register digits {7, 8, 9}
• Fixed:
  • The due date cannot be changed
  • Micro wM-Bus: Error when changing the interval
  • Bug fixes C5 (Enc7)
  • Bug fixes heat cost allocator wM-Bus
  • Radio reception does not work properly

Notes

• This release introduces a variety of new features and fixes issues to improve the performance and reliability of the software
• Users are recommended to update the app to benefit from the latest features and improvements